Flat bend for cable floor duct

seccion-l-blanco-baja-1

Flat bend for floor raceway, enables installation by avoiding the need for special cuts.

 

seccion-l-blanco-baja-5

Description

  • White color, (available at request in: black and aluminum)
  • Accessory weight: 046 kg.
  • Working temperature -40ºC to +85ºC
  • Resistance to humidity and a corrosive environment

Code 9430-02001, 9430-03002, 9430-06002

 

For installation:  When installing the floor duct, leave the necessary space between the ends (where the accessory is to be placed). To fix the accessory, follow the following steps:

  1. Place the accessory and mark the 4 drill holes
  2. Remove the accessory and drill the holes using a 7/32” (5.5mm) drill bit and insert the yellow wall plugs TP1X.
  3. Place the accessory and screw the base in.
  4. Fix the accessory pressurized cap when completing the installation

 

medidas seccion l media caña

Materials

  • Self-extinguishable ABS

Commercial Display

  • Bag with 9 pieces (Includes 1 “T” Accessory, 4 Wall Plugs TP1X Y 4 screws No. 8X1″)

Application

seccion l media caña

 

 

 

 

 

 

This product may also be found as:

  • Flat Angle
  • Accessory L
  • Flat corner fitting floor duct
  • Connector L
  • Accessory for PVC raceway